Weather 5010
Weather-facing sealing for exposed building joints.
A neutral silicone route for perimeter sealing, curtain walls, ACP and other exterior building joints.
Why this product
Weather-facing sealing for exposed building joints.
- Designed for exterior sealing
- Neutral-cure chemistry
- For curtain walls and exterior glazing
Applications and substrates
Where Weather 5010 fits.
Recommended applications
GlazingACP jointsWeatherproofingBuilding perimetersCurtain wallsExterior glazingAssociated substrates
GlassAluminiumStainless steelGalvanized steelConcreteMasonryBrickCeramic tilesUPVCPolycarbonateACPPainted surfacesWoodEnvironment
ExteriorApplication guidance
Prepare the exposed joint. Seal without air pockets.
Surface preparation
- Ensure joints are dry, sound and contamination-free.
- Use appropriate joint backing where required by the specification.
Application method
- Mask joint edges for a clean finish.
- Gun a continuous bead without air pockets.
- Tool and remove masking before skin formation.
Usage considerations
- Refer to the official TDS for movement capability and primer requirements.
Technical information
Weather 5010 specification.
Values below are taken from the current official technical data sheet. Actual performance depends on substrate, preparation and site conditions.
- Chemistry
- Neutral
- Pack sizes
- 280 ml, 600 ml sausage
- Colours
- Clear, Black, White, Grey, Brown
- Shelf life
- 12 months in original packaging
- Storage
- Store in a dry, well-ventilated place below 30°C.
Tested performance
Technical data.
PropertySpecificationTesting standard
Paste densityClear: 0.99-1.1 g/cc; other colours: 1.35-1.45 g/ccASTM D 1475
Skin formation20-30 min—
Tack-free time180 minASTM C 679-15
Elongation>600%ASTM D 412
HardnessShore A 18-25ASTM D 2240
Tensile strength>10 kg/cm²ASTM D 412
Service temperature-40°C to 200°C—
Restrictions on use
- Not recommended for structural bonding.
Frequently asked questions
Answers about Weather 5010.
What is Weather 5010 used for?
Weather 5010 is positioned for glazing, acp joints, weatherproofing, building perimeters, curtain walls, exterior glazing. The best fit depends on the surfaces and exposure involved in the job.
Which surfaces are associated with Weather 5010?
The current application map includes Glass, Aluminium, Stainless steel, Galvanized steel, Concrete, Masonry, Brick, Ceramic tiles, UPVC, Polycarbonate, ACP, Painted surfaces, Wood. Carry out a compatibility test where the substrate or coating is unfamiliar.
Can Weather 5010 be used outdoors?
Weather 5010 is mapped to exterior applications. Check the actual joint, substrate and exposure conditions before use.
Related products
Compare the closest alternatives.
