Bathmate
Flexible acrylic sealant for bathrooms and interior finishing.
A permanently flexible, water-based acrylic sealant for washbasins, wall-to-wood joints and electrical switch boards.
Why this product
Flexible acrylic sealant for bathrooms and interior finishing.
- Anti-fungal and mould resistant
- Forms a watertight seal
- Strong adhesion to ceramic
- High flexibility
- Eco-friendly
Applications and substrates
Where Bathmate fits.
Recommended applications
Washbasin-to-wall gapsElectrical board surroundsAssociated substrates
WashbasinsWallsWoodElectrical boardsCeramicEnvironment
InteriorApplication guidance
Start with a dry joint. Finish for wet-area use.
Surface preparation
- Remove soap residue, moisture and loose material.
Application method
- Apply a neat continuous bead and tool immediately.
- Allow at least 24 hours before painting or water exposure.
Usage considerations
- Do not use in continuous water immersion.
- Do not apply if rain or frost is imminent.
Technical information
Bathmate specification.
Values below are taken from the current official technical data sheet. Actual performance depends on substrate, preparation and site conditions.
- Chemistry
- Acrylic
- Pack sizes
- 75 g tube, 150 g tube, 300 ml cartridge
- Colours
- White, Black, Brown
- Shelf life
- 18 months in original packaging
- Storage
- Store in a dry, well-ventilated place below 30°C.
Tested performance
Technical data.
PropertySpecificationTesting standard
Paste density1.40-1.55 g/ccASTM D 1475
Skin formation5-10 min—
Tack-free time60 minASTM C 679-15
Elongation>500%ASTM D 412
HardnessShore A 35-45ASTM D 2240
Tensile strength>3 kg/cm²ASTM D 412
Certifications and standards
- ASTM G21 certified
Claims shown are reproduced from the supplied TDS. Request the supporting certificate or test report before specification.
Restrictions on use
- Do not use in continuous water immersion.
- Do not apply if rain or frost is imminent.
Frequently asked questions
Answers about Bathmate.
What is Bathmate used for?
Bathmate is positioned for washbasin-to-wall gaps, electrical board surrounds. The best fit depends on the surfaces and exposure involved in the job.
Which surfaces are associated with Bathmate?
The current application map includes Washbasins, Walls, Wood, Electrical boards, Ceramic. Carry out a compatibility test where the substrate or coating is unfamiliar.
Can Bathmate be used outdoors?
Bathmate is currently positioned for interior applications rather than general exterior use.
Related products
Compare the closest alternatives.
