Sanitary Super White
Professional sanitary sealing route with advanced mould resistance.
A one-part acetoxy silicone for washbasins, bathtubs, commodes, urinals and glass shower cubicles.
Why this product
Professional sanitary sealing route with advanced mould resistance.
- Fungus and mildew resistant
- ASTM G21 certified
- Excellent water resistance
- Ozone and UV resistant
- Suitable for humid conditions
Applications and substrates
Where Sanitary Super White fits.
Recommended applications
Washbasin-to-wall gapsShower unitsBathtub sealingCommode and urinal sealingWashbasinsSanitary sealingAssociated substrates
Glass shower cubiclesBathtubsCommodesUrinalsWashbasinsSanitary fixturesEnvironment
InteriorApplication guidance
Dry the fixture joint. Tool a water-shedding seal.
Surface preparation
- Remove old sealant, dirt, grease and contaminants; leave the joint clean and dry.
Application method
- Apply into the base of the joint, wetting both sides.
- Tool immediately and do not disturb for 24 hours after skin formation.
Usage considerations
- Not recommended for general glazing, zinc, brass, copper or polished surfaces such as mirrors.
- Do not apply if rain or frost is imminent.
Technical information
Sanitary Super White specification.
Values below are taken from the current official technical data sheet. Actual performance depends on substrate, preparation and site conditions.
- Chemistry
- Acetoxy
- Pack sizes
- 280 ml cartridge
- Colours
- White
- Shelf life
- 12 months in original packaging
- Storage
- Store in a dry, well-ventilated place below 30°C.
Tested performance
Technical data.
PropertySpecificationTesting standard
Paste density0.94-0.98 g/ccASTM D 1475
Skin formation4-8 min—
Tack-free time15-30 minASTM C 679-15
Elongation>350%ASTM D 412
HardnessShore A 18-24ASTM D 2240
Tensile strength>12 kg/cm²ASTM D 412
Certifications and standards
- ASTM G21 certified
Claims shown are reproduced from the supplied TDS. Request the supporting certificate or test report before specification.
Restrictions on use
- Not recommended for general glazing applications.
- Not recommended on zinc, brass, copper or polished surfaces such as mirrors.
- Do not apply if rain or frost is imminent.
Frequently asked questions
Answers about Sanitary Super White.
What is Sanitary Super White used for?
Sanitary Super White is positioned for washbasin-to-wall gaps, shower units, bathtub sealing, commode and urinal sealing, washbasins, sanitary sealing. The best fit depends on the surfaces and exposure involved in the job.
Which surfaces are associated with Sanitary Super White?
The current application map includes Glass shower cubicles, Bathtubs, Commodes, Urinals, Washbasins, Sanitary fixtures. Carry out a compatibility test where the substrate or coating is unfamiliar.
Can Sanitary Super White be used outdoors?
Sanitary Super White is currently positioned for interior applications rather than general exterior use.
Related products
Compare the closest alternatives.
