Hybrid 2 in 1
One route for strong sealing and bonding.
A hybrid product intended for interior and exterior sealing and bonding where adhesion and a clean finish are both important.
Why this product
One route for strong sealing and bonding.
- Sealing and bonding in one product
- Permanently elastic and non-shrinking
- Paintable after cure
- Solvent-free and low odour
- Primerless adhesion
- Excellent UV resistance
Applications and substrates
Where Hybrid 2 in 1 fits.
Recommended applications
BondingMountingMetal fabricationExterior gap fillingAssociated substrates
ConcreteCement mortarBrickMasonryNatural stoneGraniteMarbleCeramic tilesPorcelainGlassAluminiumAnodized aluminiumStainless steelGypsum boardWoodUPVCPVCPolycarbonatePainted surfacesEnvironment
InteriorExteriorApplication guidance
Prepare both surfaces. Bond within the open time.
Surface preparation
- Remove dust, grease and weak surface material.
- Carry out a small adhesion test on unfamiliar surfaces.
Application method
- Apply in beads or dots appropriate to the assembly.
- Join components within the open time.
- Support bonded parts until adequate initial hold develops.
Usage considerations
- Load, cure and compatibility limits require confirmation from the official TDS.
Technical information
Hybrid 2 in 1 specification.
Values below are taken from the current official technical data sheet. Actual performance depends on substrate, preparation and site conditions.
- Chemistry
- Hybrid
- Pack sizes
- 290 ml cartridge, 600 ml sausage
- Colours
- Black, White, Grey
- Shelf life
- 12 months in original packaging
- Storage
- Store in a dry, well-ventilated place below 30°C.
Tested performance
Technical data.
PropertySpecificationTesting standard
Paste density1.45-1.55 g/ccASTM D 1475
Skin formation20-22 min—
Tack-free time15 hrsASTM C 679-15
Elongation300-700%ASTM D 412
HardnessShore A 35-50ASTM D 2240
Tensile strength>15 kg/cm²ASTM D 412
Restrictions on use
- Test adhesion on difficult or coated substrates.
- Surface temperatures above 50°C may cause rapid cure or bubbles; temperatures below 5°C may slow curing.
Frequently asked questions
Answers about Hybrid 2 in 1.
What is Hybrid 2 in 1 used for?
Hybrid 2 in 1 is positioned for bonding, mounting, metal fabrication, exterior gap filling. The best fit depends on the surfaces and exposure involved in the job.
Which surfaces are associated with Hybrid 2 in 1?
The current application map includes Concrete, Cement mortar, Brick, Masonry, Natural stone, Granite, Marble, Ceramic tiles, Porcelain, Glass, Aluminium, Anodized aluminium, Stainless steel, Gypsum board, Wood, UPVC, PVC, Polycarbonate, Painted surfaces. Carry out a compatibility test where the substrate or coating is unfamiliar.
Can Hybrid 2 in 1 be used outdoors?
Hybrid 2 in 1 is mapped to exterior applications. Check the actual joint, substrate and exposure conditions before use.
Related products
Compare the closest alternatives.
