Saves Nails
Instant-grab construction adhesive for interior and exterior fixing.
A high-strength SBS adhesive for bonding construction substrates without exposed mechanical fixings.
Why this product
Instant-grab construction adhesive for interior and exterior fixing.
- Instant grab
- High mechanical strength
- Paintable
- Single component
- Interior and exterior use
Applications and substrates
Where Saves Nails fits.
Recommended applications
BondingFixingInterior bondingPanel bondingWall mouldingBatten installationNameplate fixingAssociated substrates
ConcreteWoodAluminiumParticle boardMDFStoneCeramicMetalPlasterBrickMasonryEnvironment
InteriorExteriorApplication guidance
Prepare the fixing surfaces. Apply, press and support.
Surface preparation
- Ensure substrates are clean, dry and free from grease, oil, dust and loose paint.
Application method
- Apply a 4–6 mm bead with beads no more than 45 cm apart.
- Use the TDS one-way or two-way bonding method for the load and substrate.
- Support stressed assemblies for at least 24 hours.
Usage considerations
- Plasticiser migration may occur with some PVC materials.
- Do not use where continued elevated-temperature exposure will occur.
- Keep away from ignition sources.
Technical information
Saves Nails specification.
Values below are taken from the current official technical data sheet. Actual performance depends on substrate, preparation and site conditions.
- Chemistry
- SBS
- Pack sizes
- 290 ml cartridge
- Colours
- Beige
- Shelf life
- 12 months in original packaging
- Storage
- Store in a dry, well-ventilated place below 30°C.
Tested performance
Technical data.
PropertySpecificationTesting standard
Paste density1.300-1.400 g/ccASTM D 1475
Skin formation10-15 sec—
HardnessShore A 70-80ASTM D 2240
Lap shear strength>15 kg/cm²ASTM D 1002-10
Restrictions on use
- Keep away from flames and ignition sources above the flash point.
- Plasticiser migration may occur with some PVC materials.
- Solvent may affect veneer plywood.
- Do not use where continued elevated-temperature exposure will occur.
Frequently asked questions
Answers about Saves Nails.
What is Saves Nails used for?
Saves Nails is positioned for bonding, fixing, interior bonding, panel bonding, wall moulding, batten installation, nameplate fixing. The best fit depends on the surfaces and exposure involved in the job.
Which surfaces are associated with Saves Nails?
The current application map includes Concrete, Wood, Aluminium, Particle board, MDF, Stone, Ceramic, Metal, Plaster, Brick, Masonry. Carry out a compatibility test where the substrate or coating is unfamiliar.
Can Saves Nails be used outdoors?
Saves Nails is mapped to exterior applications. Check the actual joint, substrate and exposure conditions before use.
Related products
Compare the closest alternatives.
